What does it mean if my Kyocera All in One Printer says 'Paper drawer is out of order'?
If your Kyocera All in One Printer displays 'Paper drawer is out of order' or 'Paper cassette is out of order', it indicates that the drawer or cassette currently in use is malfunctioning and cannot be used. Contact your service representative immediately. You can continue copying using another drawer or cassette.
How to resolve 'Reposition original' message on Kyocera All in One Printer?
The message 'Reposition original' on your Kyocera All in One Printer means that the orientation of the original document and the selected paper are different. Change the orientation of the original to match the paper. Alternatively, pressing the Start key will initiate same-size copying.
What to do if Kyocera All in One Printer says 'Set drawer' or 'Close paper cassette'?
If your Kyocera All in One Printer displays 'Set drawer' or 'Close paper cassette', it means one of the drawers or cassettes is not closed properly. Pull it out and push it back in all the way to ensure it is correctly set.
How to fix 'System error. Disconnect power plug from the socket' on Kyocera All in One Printer?
If your Kyocera All in One Printer shows 'System error. Disconnect power plug from the socket', a system error has occurred. Disconnect the power plug from the outlet and then reconnect it.
Why does my Kyocera All in One Printer say 'Check paper size'?
The 'Check paper size' message on your Kyocera All in One Printer indicates that the loaded paper is not suitable for the selected mode. Check the paper to ensure it meets the requirements.
What to do if Kyocera All in One Printer shows 'System error. Main switch off/on'?
If your Kyocera All in One Printer displays the message 'System error. Main switch off/on', a system error has occurred. Turn the main power switch OFF and then ON to resolve the issue.
How to fix 'Add paper in drawer' message on Kyocera All in One Printer?
The 'Add paper in drawer' message on your Kyocera All in One Printer means the indicated drawer or cassette is empty. Load paper into the drawer or cassette.
Why does my Kyocera All in One Printer say 'Ready to copy. Add toner'?
The message 'Ready to copy. Add toner' on your Kyocera All in One Printer indicates that the toner level is low. Replace the toner container immediately because only one copy can be made at a time.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| First Print Out Time | 6.5 seconds |
| Max Copy Resolution | 600 x 600 dpi |
| Zoom Range | 25% - 400% |
| Scan Resolution | 600 x 600 dpi |
| Hard Drive | Optional |
| Operating System Compatibility | Windows, Mac, Linux |
| Warranty | 1 year |
| Type | Monochrome Laser Multifunction Printer |
| Copy Speed (Black) | 35 cpm |
| Paper Size | A3, A4, A5, B4, B5 |
| Interface | USB 2.0, Ethernet |
To Next Page
