Scanning Functions
2-6
Selecting Color Scan Mode
The following color modes are available for scanning:
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Scan Color Select key.
3
Press the S key or the T key to select the desired
mode and press the Enter key. The message display
shows Completed and returns to the scanner basic
screen.
4
Press the Start key to start scanning. When scanning is completed, the machine automatically
sends e-mail to the destination e-mail address. The scanned image is attached with the e-mail.
Mode Description
Full Color The original will be scanned in full color. The scanning
exposure will be set to Manual.
Grayscale The shading of the original will be reproduced. The scanning
exposure will be set to Manual.
Monochrome The original will be scanned in monochrome. The resulting file
size for the scan data will be smaller in comparison with the
other color modes.
*
ScanColor Select:
Full Color
Cancel
Monochrome
Grayscale
*
To Next Page
Loading...
