Kyocera KM-1815 - Registering Custom Original Size

System Settings
5-31
Registering Custom Original Size
If you normally copying or scanning onto an original size that is not registered in this machine
(non-standard size), it is convenient to register that size in advance. It is possible to register a
custom original size within the following ranges:.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Common
Setting and press the Enter key. The Common
Setting screen is displayed.
3
Press the S key or the T key to select Orig./Paper
Set and press the Enter key. The Orig./Paper Set
screen is displayed.
4
To register a custom original size, press the S key or
the T key to select Custom Orig.Size and press
the Enter key. The Custom Orig.Size screen is
displayed.
Measurement X Range Y Range
Inch specifications 5.83 to 14.02 inches 3.15 to 8.50 inches
Metric specifications 148 to 356 mm 80 to 216 mm
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
Common Setting:
Default Operat.
Sound Setting
Orig./Paper Set.
Exit
Orig./Paper Set.:
Custom Orig.Size
Back
Def. Orig. Size
Exit