Operation Status
4-7
Pausing Jobs
You can temporarily pause the processing of the jobs. You can also cancel jobs while processing is
paused.
Perform the following procedure to temporarily pause all jobs.
Note When you want to stop the copying jobs, press the Stop/Clear key. All jobs are stopped and the
Pausing Job List screen is displayed.
1
Press the Status/Job Cancel key. The Status menu screen is displayed.
2
Press the left select key. The Pausing Job List
screen, which shows a list of the jobs being processed,
is displayed.
Notes • Processing of the jobs are paused as long as the Pausing Job List screen is displayed.
• To resume processing of the jobs, refer to Resuming Jobs on page 4-8. To cancel a job, refer
to Canceling Jobs During Pausing on page 4-7.
Canceling Jobs During Pausing
Perform the following procedure to cancel any jobs while processing of the jobs has been paused.
1
Press the S key or the T key to select the job to
cancel. Press the left select key. The message display
indicated Cancel Job. Are you sure? is
displayed.
2
Press the left select key.
Note If you do not want to cancel that job, press the right select key. The message display returns to the
Pausing Job List screen.
*
Status Menu:
Print Job Log
Print Job Status
Send Job Status
Pause
Pausing Job List:
0010
0008
0009
Cancel Resume
Copy-A
Copy-B
Doc-1
*
Cancel Job.
Are you sure?
NoYes
9
To Next Page
Loading...
