Kyocera KM-1815 - Setting the Emulation Mode

Printer Settings
3-9
Setting the Emulation Mode
This section explains the procedure to select the emulation mode.
Available emulations are: Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, PCL6, KPDL,
and KPDL (AUTO).
If KPDL (AUTO) emulation is selected, the machine will automatically switch from KPDL to a
alternative emulation mode in accordance with the data to be printed. If KPDL emulation is selected,
you can select whether or not to have a report printed out automatically whenever a KPDL error
occurs during printing.
1
Press the System Menu/Counter key. The System Menu/Count screen is displayed.
2
Press the S key or the T key to select Printer
Setting and press the Enter key. The Printer
Setting screen is displayed.
3
Press the S key or the T key to select Emulation
and press the Enter key. The Emulation screen is
displayed.
4
Press the S key or the T key to select the desired
emulation mode, and press the Enter key.
5
If you selected Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, or PCL6, the
message display shows Completed and returns to the Printer Setting screen.
6
If you selected KPDL, the KPDL Err Rep screen is
displayed. Select whether or not a report is to be
printed out upon a KPDL error.
*
Sys. Menu/Count.:
Copy Setting
Printer Setting
Common Setting
Exit
*
Printer Setting:
Back
Exit
Emulation
*
Emulation:
Cancel
*
KPDL
PCL6
KPDL(Auto)
*
KPDL Error Rep.:
Cancel
On
Off
*