Scanning Functions
2-8
Selecting the Scanning Resolution
Perform the following procedure to set the desired level of resolution at which the original is
scanned. The higher the resolution value is, the finer the image will be. In this case, however, the
size of the resulting file will become larger and the scanning time will be increased.
Note The maximum resolution using full color or gray scale modes is 300 dpi. To scan in full color or gray
scale with 400 dpi or 600 dpi resolution, optional expansion memory is required. Refer to Chapter 5,
Expansion Memory in Basic Operation Guide.
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Scan Resolution key.
3
Press the S key or the T key to select the desired
scanning resolution and press the Enter key. The
message display shows Completed and returns to the
scanner basic screen.
*
Scan Resolution:
200x200dpi
400x400dpi
300x300dpi
Cancel
*
To Next Page
Loading...
