Scanning Functions
2-9
Adjusting the Exposure for Scanning
This section explains how to make adjustments to the exposure mode. The default exposure is
Manual.
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Exposure key.
3
Press the S key or the T key to select manual and
press the Enter key.
If you selected Manual, the Manual screen is
displayed. Proceed to the next step.
If you selected Auto, the message display shows
Completed and returns to the scanner basic screen.
4
Press the S key or the T key to adjust the value for
the exposure as desired and press the Enter key. The
massage display shows Completed and returns to the
scanner basic screen.
Mode Description
Auto Use this mode to enable the machine to automatically select the
optimal exposure setting for the original. This mode will be available
when you have selected Monochrome in the Scan Color mode.
Manual Use this mode to adjust the scan exposure manually. There are
seven exposure levels available.
*
Exposure:
Manual
Auto
Cancel
*
*
Manual:
Cancel
Lighter -2
Lighter -1
Normal
To Next Page
Loading...
