Copying Functions
1-7
Adjusting Copy Exposure
This section explains how to make adjustments to the exposure mode. The default exposure is
Manual.
1
Press the Copy key. The copy basic screen is displayed.
2
Press the Exposure key.
3
Press the S key or the T key to select Manual and
press the Enter key.
If you selected Manual, the Manual screen is
displayed. Proceed to the next step.
If you selected Auto, the message display shows
Completed and returns to the copy basic screen.
4
Press the S key or the T key to adjust the value for
the exposure as desired. Press the Enter key. The
message display shows Completed and returns to the
copy basic screen.
Mode Description
Auto The machine automatically selects the optimal exposure setting for
the original being copied.
Manual The copy exposure setting is selected manually. There are 7
exposure levels available.
*
Exposure:
Manual
Auto
Cancel
*
*
Manual:
Cancel
Lighter -2
Lighter -1
Normal
To Next Page
Loading...
