Copying Functions
1-17
7
Press the S key or the T key to select the type of the
borderline and press the Enter key. The Orig.
Placement screen is displayed.
8
Press the S key or the T key to select the original
placement and press the Enter key. The message
display shows Completed and returns to the
Function screen.
9
Press the right select key. The message display returns to the copy basic screen.
Using the Document Processor with Combine Mode
The following explains how to make copies with the combine modes when the document processor
is installed.
1
Set the originals in the document processor.
2
Press the Copy key. The copy basic screen is displayed.
3
Select the combine mode. For more information, refer to page 1-14.
4
Press the Start key. The originals are scanned
automatically and copying in the combine mode will
begin.
*
Border Line:
Solid Line
None
*
Cancel
Dotted Line
Orig. Placement:
Cancel
*
Top Edge to Rear
Top Edge to Left
To Next Page
Loading...
