System Settings
5-15
Restarting the Machine
Perform the following procedure to restart the machine after you have changed any network settings
in order to properly register the content of those settings in the machine.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select System
Setting and press the Enter key. The System
Setting screen is displayed.
3
Press the S key or the T key to select Restart and
press the Enter key. Are you sure? is displayed.
4
To restart the machine, press the left select key.
Sys. Menu/Count.:
Counter
System Setting
Report
Exit
System Setting:
Parallel Setting
Network Setting
Restart
Exit
Restart.
Are you sure?
NoYes
To Next Page
Loading...
