Copying Functions
1-2
Selecting the Source of Paper Feed
Perform the following procedure to select the desired source for paper feed.
Notes • For more information on registering the paper size in the cassette(s), refer to Default Original
Size on page 5-35.
• For information of the specifications of the paper used with this machine, refer to Paper
Selection on page 2 of the Appendix.
Selecting a Cassette
1
Press the Copy key. The copy basic screen is displayed.
2
Press the Paper select key.
3
Press the S key or the T key to select the required
cassette and press the Enter key. The message
display shows Completed and returns to the copy
basic screen.
Selecting the MP Tray
1
Press the Copy key. The copy basic screen is displayed.
2
Press the Paper select key.
3
Press the S key or the T key to select MP Tray and
press the Enter key. The MP Tray Size screen is
displayed.
Mode Description
Auto Automatically selects and feeds paper from either the cassette or the
MP tray, whichever holds the paper size to be copied or printed onto.
Cassette1 Feeds paper from cassette 1.
Cassette2 Feeds paper from cassette 2. Cassette 2 is an optional accessory. If
it is not installed, it will not be available for selection.
MP Tray Feeds paper from the MP tray. The paper size and type must be
registered in advance.
*
Cancel
A 4 Plain
MP Tray
A 5 Plain
Paper Select:
*
Cancel
A 4 Plain
MP Tray
A 5 Plain
Paper Select:
To Next Page
Loading...
