Kyocera KM-1815 - Selecting Original Placement

Copying Functions
1-12
Selecting Original Placement
Perform the following procedure to select the direction that the original is copied.
Using the Platen
Using the Document Processor
1
Press the Copy key. The copy basic screen is displayed.
2
Press the Function key.
3
Press the S key or the T key to select Orig.
Placement and press the Enter key. The Orig.
Placement screen is displayed.
4
Press the S key or the T key to select either Top
Edge to Rear or Top Edge to Left and press the
Enter key. The message display shows Completed
and returns to the Function screen.
5
Press the right select key. The message display returns to the copy basic screen.
Left
Top Edge to Rear Top Edge to Left
Rear
Top Edge to Rear Top Edge to Left
Rear
Left
*Combine
Collate
Orig. Placement
Function:
Exit
Orig. Placement:
Cancel
*
Top Edge to Rear
Top Edge to Left