System Settings
5-12
3
Press the S key or the T key to select the default
setting that you want to change and press the Enter
key. The screen for the selected default setting is
displayed.
4
Press the S key or the T key to select the new default
setting and press the Enter key. The message display
shows Completed and returns to the Function
Default screen.
Note If you want to change the value for another default setting, repeat steps 3 and 4.
5
Press the Copy or E-Mail key. The basic screen is displayed.
6
Press the Reset key. The default values will be activated.
Function Default:
Scan Resolution
ScanColor Select
Back
Exit
ScanColor Select:
Full Color
*
Cancel
Monochrome
Grayscale
To Next Page
Loading...
