Kyocera KM-1815 - Setting the Number of Copies

Copying Functions
1-8
Setting the Number of Copies
Perform the following procedure to set the number of copies to be made. The number of copies can
be up to 999.
Notes • To avoid paper jam or damage to the machine, do not leave more than approximately 30 sheets
of standard paper (80 g/m
2
) or one sheet of special paper in the face-up tray.
• To avoid paper jam or damage to the machine, do not leave more than approximately 150
sheets of standard paper (80 g/m
2
) in the output tray.
1
Set the original.
2
Press the Copy key. The copy basic screen is displayed.
3
Use the numeric keys to change the number of copies
to be made.
Notes • To cancel the number of copies entered, press the Stop/Clear key. The display will be set to 1.
• If you attempt to enter more than 999, the number of copies will automatically be set to 999.
*
Ready to copy.
A 4
A 4
Zoom
100%
Set: 1