Using COMMAND CENTER
6-9
Basic > Reset Page
This page allows you to restart the machine in order to make all settings in the machine valid. It is
also possible to select to have all settings returned to their factory default values.
Basic > Device Defaults Page
This page allows you to change the language that is used in the message display, as well as to turn
the Auto Sleep Mode On or Off.
Item Description
Restart entire device When clicking the Restart button, the machine restarts.
The setting becomes effective when you restart the machine. Always restart
the machine after you have changed any settings for the Basic > Network
Page or the Advanced Page.
Reset entire device to
factory default
When clicking the Reset button, the machine returns to the setting in the
time of shipment from factory.
Item Description
Operation Panel
Language
You can select the language of the messages on the message display by
following the procedure given below. The following languages are available
for selection in the drop down list:
English, Français, Deutsch, Italiano, Nederlands, Español, Português, and
the downloaded languages
You can optionally download messages in other languages. Contact your
dealer for information.
Enter Sleep after Adjusts the sleep time between 1 to 240 minutes. The default setting is 30
minutes.
Sleep Mode Switches Auto Sleep On or Off. The default setting is On.
To change Advanced Sleep Mode:
1 Click Advanced which is in the right side of the drop down list.
2 Switches Sleep Mode On or Off.
3 Click the Submit button.
To Next Page
Loading...
