Kyocera DF-9100 - Page 187

3-109
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
6 Secure stopper with screws that took before (Screw x2: M4x12). Secure screws [A] and [B] to either places in
the red frame below after complete height adjustment (Screw x2: 4x10 Black TP). Screw was removed in step
13-1 and 13-3.
14
Adjust the level.
1 Remove screws (Screw x1: M4x12/Screw x1: M4x10 Black TP). The screw will use in step 14-6.
[A] [B]
[A] M4x10 Black TP
M4x12
M4x12
[B] M4x10 Black TP
M4x10 Black TP
M4x12