Kyocera DF-9100 - Page 207

3-129
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
6
Put back the connector cover [A] that removed in step 1 (Screw x1). Screw was
removed in step 1.
Preparation for Inverter and Decurler Unit (DE-9100)
7
Remove bracket of DE-9100.
1 Open front right cover [A]. Remove the bracket [B] (Screw x4). Brackets [B] and screws will not be used in this
installation again.
[B]
[A]
[B]
[A]