6-17
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
15
(Display: Manu 0402) Open all the clamps [A] of Y, K, C, M, CL in ink supply unit.
• Select [Execute] after completing the steps, then press [Start] key to continue.
16
(Display: Auto 0403) Treatment unit and the image conveying unit move to shipping
position.
• Select [Execute] and press [Start] to run job.
17
(Display: Finish) Exit from maintenance mode and turn the power and the main
switch off.
18
Open the front right upper cover [A] and the front left upper cover [B].
19
Pull out the image conveying unit [A]. (Screw x4)
To Next Page
Loading...
