What to do if settings are not registered on Kyocera FS-1118MFP?
The settings you made in COMMAND CENTER for your Kyocera All in One Printer might not be registered because you may have forgotten to finalize the changes. Make sure you click the Submit button after adjusting the settings and then either navigate to another page or close the COMMAND CENTER window. Alternatively, restart the printer to ensure all settings are registered.
What to do if Error or Warning is displayed on Kyocera FS-1118MFP All in One Printer?
If an Error or Warning is displayed under the STATUS indicator of your Kyocera All in One Printer, check the printer's display for a specific error message. Then, follow the corresponding troubleshooting steps in the Operation Guide.
How to fix 'I can’t access the other pages' on Kyocera All in One Printer?
If you are unable to access other pages in COMMAND CENTER on your Kyocera All in One Printer, it might be because the administrator has set a password. In this case, you need to enter the password to proceed.
Why characters do not display properly in Kyocera FS-1118MFP?
If characters are not displaying properly in COMMAND CENTER for your Kyocera All in One Printer, it is likely that your browser application is not fully compatible with COMMAND CENTER. To resolve this, use a browser application that supports COMMAND CENTER.
What to do if I can’t perform settings on Kyocera FS-1118MFP All in One Printer?
You may be unable to perform settings changes on your Kyocera All in One Printer because the printer or scanner is currently in operation. Wait until the current operation is complete before attempting to modify settings.
Why can't I access COMMAND CENTER on my Kyocera FS-1118MFP?
There are several reasons why you might not be able to access COMMAND CENTER on your Kyocera All in One Printer: * The printer might not be turned on. In this case, turn the power on and wait until it is in a ready state. * The network cable may not be properly connected. Ensure that the network cable is securely connected. * The network settings on the printer might be incorrect. Configure the network settings from the operation panel, consulting your network administrator for the correct settings. * The IP address for the printer might be entered incorrectly. Double-check the IP address, verifying it with your network administrator. * The LAN settings in your browser application could be wrong. Review the settings in your browser application, referring to the browser's Help fu...
General| Print technology | Laser |
|---|---|
| Maximum resolution | 1800 x 600 DPI |
| Time to first page (black, normal) | 8 s |
| Print speed (black, normal quality, A4/US Letter) | 18 ppm |
| Fax memory | 6 MB |
| Modem speed | 33.6 Kbit/s |
| Dimensions (WxDxH) | 496 x 421 x 385 mm |
| Power requirements | AC 220 ~ 240 V, 50/60 Hz |
| Networking features | TCP/IP |
| All-in-one functions | Scan |
| Standard media sizes | 60-105 g/m2, A4, B5, A5, A6, Letter, Legal, Folio 50-sheet multi-purpose tray, 60-163 g/m2, A4, B5, A5, A6, Letter, Legal, Folio, Custom (105 x 148 to 216 x 356 mm), envelopes |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows 98, 98SE, ME, 2000, XP, NT 4.0 |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 550 sheets |
| Maximum print size | 210 x 297 mm |
| Maximum ISO A-series paper size | A4 |
| Internal memory | 96 MB |
| Processor model | 750CXr |
| Processor family | PowerPC |
| Built-in processor | Yes |
| Maximum internal memory | 320 MB |
| Sound power level (standby) | 43 dB |
| Sound pressure level (printing) | 65 dB |
| Bundled software | Paper Port Deluxe 9.2 |
| Grayscale levels | 256 |
| Certification | TÜV/GS, CE |
| Maximum duty cycle | 10000 pages per month |
| Power consumption (standby) | 76 W |
| Power consumption (PowerSave) | 40 W |
| Power consumption (average operating) | 409 W |
| Market positioning | Home & office |
To Next Page
