Kyocera FS-1125MFP - User Manual

Other manuals for Kyocera FS-1125MFP

Quick Installation Guide36 pages

Instructions17 pages

Questions and Answers

D
Debra RodriguezAug 20, 2025
How to fix Kyocera FS-1125MFP that won't print from computer?
- B
  Breanna JonesAug 20, 2025
  If your Kyocera All in One Printer is not printing from the computer, check the following: * Ensure both ends of the power cord are securely connected. * Verify the machine is powered on. If not, turn it on. * Make sure the correct interface cable is securely connected. * If the machine was powered on before connecting the interface cable, power it off and then on again after connecting the cable. * Confirm that the print job is not paused; if it is, resume printing.
C
Christy MillerAug 21, 2025
What to do if Kyocera FS-1125MFP All in One Printer prints status page but not computer data?
- L
  Laura BergAug 22, 2025
  If your Kyocera All in One Printer prints a status page but not data from the computer: * Ensure both ends of the interface cable are securely connected and consider replacing the interface cable. * Try printing another file or using another print command to check program files and application software. If the problem occurs with a specific file or application, check the printer settings for that application.
R
robertdouglasAug 25, 2025
How to resolve gray background on Kyocera FS-1125MFP All in One Printer printouts?
- Y
  yevansAug 25, 2025
  To address a gray background on printouts from your Kyocera All in One Printer: * Check the toner container and replace it if necessary. * Increase the adjustment value for the Drum charge setting in the Maintenance Menu. * Decrease the adjustment value for the Print density setting in KYOCERA Client Tool.
T
Tiffany SmithAug 26, 2025
How to fix skewed images on Kyocera All in One Printer?
- G
  Gregory DavisAug 27, 2025
  To resolve images that are skewed when using your Kyocera All in One Printer: * When placing originals on the platen, align them with the original size indicator plates. * Check the position of the paper width guides to ensure the paper is loaded correctly.
C
carolinemartinAug 27, 2025
How to fix vertical streaks on Kyocera All in One Printer printouts?
- S
  Samantha BriggsAug 27, 2025
  To address printouts with vertical streaks on your Kyocera All in One Printer, clean the slit glass cover.
A
Andrew SolisAug 29, 2025
How to eliminate moire pattern on Kyocera FS-1125MFP All in One Printer copies?
- R
  richardsonjustinAug 30, 2025
  To resolve copies with a moire pattern from your Kyocera All in One Printer, set the image quality to Photo if the original is a printed photograph.
C
caleb47Sep 1, 2025
How to improve text clarity on Kyocera FS-1125MFP?
- P
  Philip KirkSep 1, 2025
  If texts are not clearly printed by your Kyocera All in One Printer, select the appropriate image quality for the original.
B
Brittney LesterSep 2, 2025
What to do if Kyocera FS-1125MFP All in One Printer printouts are wrinkled?
- S
  Sara HartSep 3, 2025
  To resolve printouts that are wrinkled when using your Kyocera All in One Printer, replace the paper with new paper.
K
Kenneth LarsenSep 5, 2025
What to do if Kyocera All in One Printer doesn't make copies when pressing start?
- C
  Colin JohnsonSep 5, 2025
  If pressing [Start] on your Kyocera All in One Printer does not produce copies: * Check the message on the machine screen, KYOCERA Client Tool, or the Status Monitor and respond accordingly. * If the machine is in Sleep mode, press any key on the operation panel to recover it.
F
fhowardSep 7, 2025
How to fix dropouts or stray dots on Kyocera FS-1125MFP printouts?
- Y
  ylewisSep 7, 2025
  To resolve printouts from your Kyocera All in One Printer that have dropouts or stray dots, increase the adjustment value for the Drum charge setting in the Maintenance Menu.

Summary

Machine Parts

Front Machine Components

Identifies physical parts on the front of the machine.

Rear Machine Components

Identifies physical parts on the rear of the machine.

Operation Panel

Details functions of buttons, indicators, and display on the control panel.

Preparation

Connections

Explains how to connect the machine via USB, network, or phone line.

Loading Paper

Provides guidelines for selecting and loading paper into the machine.

Loading Originals

Details how to place documents on the platen or in the document processor.

Installing and Uninstalling Drivers and Utilities

Guides on installing/removing software for PC connectivity.

Configuration

Explains how to adjust machine settings using KYOCERA Client Tool.

Copying

Basic Operation

Step-by-step guide for performing basic copying tasks.

Manual Duplex

Instructions for copying on both sides of the paper.

Using Programs

How to register and recall frequently used copy settings.

ID Card Copy

Procedure for copying front and back of ID cards onto one sheet.

Printing

Printing from Application Software

Steps to print documents from PC applications.

About GX Driver

Overview of the printer driver interface and its tabs.

Manual Feed (FS-1025 MFP, FS-1125 MFP and FS-1325 MFP)

How to print single sheets using the manual feed tray.

Print Box

How to save and print jobs from the computer to the machine.

Scanning

Push Scan

Simple scanning from the machine's operation panel.

Quick Scan (Scan to PDF;Scan to Email;Scan to Folder)

Executing scans via KYOCERA Client Tool.

Scanning using TWAIN;WIA

Scanning using compatible applications via driver.

Default Setting (System Menu)

Operation Method

How to navigate and operate the System Menu.

System Menu Settings

Lists configurable settings within the System Menu.

Administrator ID

How to change or manage the administrator password.

FAX Operations

Before Using the Fax Machine

Initial setup for fax, including date and time.

Entering the Destination

How to input fax numbers or select from the address book.

Sending Faxes

Step-by-step guide for transmitting faxes.

Receiving Faxes

Information on automatic and memory fax reception.

Fax Settings

Configuration options for fax transmission and reception.

Sending Faxes from PC

Using the FAX Driver to send faxes from a computer.

Maintenance

Toner Container Replacement

Procedure for replacing the toner cartridge.

Maintenance Kit Replacement

Information on replacing the maintenance kit components.

Cleaning the Machine

Instructions for cleaning internal parts like the platen.

Maintenance Menu

Accessing and using the machine's maintenance functions.

Troubleshooting

Solving Malfunctions

Table of common symptoms, checkpoints, and corrective actions.

Error Messages

Explains displayed error messages and their remedies.

FAX Error Code List

Lists FAX communication error codes and their causes/actions.

Clearing Paper Jams

Detailed steps for removing paper jams from different locations.

Appendix

Character Entry Method

Guide on how to enter text and symbols using the control panel.

Specifications

Technical details and features of the machine models.

Kyocera FS-1125MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	13 s
Grayscale levels	256
Maximum scan area	Legal (216 x 356) mm
Scan speed (black)	18 ppm
Scan speed (color)	6 ppm
Image formats supported	BMP, JPG, PNG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Fax memory	2.2 MB
Modem speed	33.6 Kbit/s
Fax coding methods	MH, MMR (Fax coding method), MR
Fax transmission speed	3 sec/page
Digital sender	No
Maximum duty cycle	20000 pages per month
Number of print cartridges	1
Paper input type	Cassette
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	251 sheets
Maximum print size	216 x 356 mm
Duplex media weight	60 - 120 g/m²
Paper tray media types	Envelopes, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Display	LCD
Product color	Black, White
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
Mobile printing technologies	-
Processor family	ARM
Sound power level (standby)	29 dB
Sound pressure level (copying)	50 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Power consumption (PowerSave)	4 W
Power consumption (average operating)	355 W
Sustainability certificates	ENERGY STAR