Kyocera DuraPro - Save a Number from History; Delete History

History 35
Save a Number from History
You can easily save a number from your History to your Contacts.
1. Press > History.
2. Highlight an entry and press OPTIONS (right softkey) > Save Contact.
3. Select New Entry or Existing Entry.
4. If New Entry was selected, select a number type, and then enter the new entry name.
– or –
If Existing Entry was selected, select an existing entry to which you want to save the
number, and then highlight a number type and press .
5. Press DONE (left softkey) to save the entry.
Make a New Group Entry from History
You can create a new group from your History and save it to your Contacts.
1. Press > History > OPTIONS (right softkey) > New Group.
2. Read the message and press START (left softkey).
3. Highlight an entry you want to add to a group and press . A check mark will appear
in the box next to the selected entry.
Tip: Press OPTIONS (right softkey) > Enter New Address or Contacts to enter a new phone
number or address or to select an entry from your Contacts.
Note: Each group entry can contain up to 40 members.
4. When you have selected all the entries you want to add, press CONTINUE (left
softkey).
5. Enter a group name and press > SAVE (left softkey).
Delete History
You can delete individual or all entries in your History.
1. Press > History.
2. Highlight an entry you wish to delete and press OPTIONS (right softkey) > Delete.
3. Select Delete All to delete all entries.