Kyocera DuraPro - Delete Phone Content; Reset Your Phone and Phone Content

Settings 96
Change the Limit Use Code
1. Press > Settings > Limit Use and enter your limit use code.
2. Select Change Limit Use Code.
3. Enter your new code.
4. Re-enter your new code.
Restrict Voice Calls and Messages
1. Press > Settings > Limit Use and enter your limit use code.
2. Select Restriction.
3. Select an option:

Voice Calls to restrict incoming and outgoing voice calls except those placed to
911.

Messages to restrict sending messages except to designated recipients.
4. Select On/Off > On. Read the message and press OK (left softkey).
Note: If you select On, you cannot add, edit, or delete any Contacts or group entries.
5. Select Allowed Contacts > All Contacts or Choose Contacts.

If you select Choose Contacts, select <Add Contact>, and then choose a member
from the list. If you want to remove a member from the list, highlight the member
and press REMOVE (left softkey).
Restrict Web, Camera, and Location Mode
1. Press > Settings > Limit Use and enter your limit use code.
2. Select Restriction.
3. Select an option:

Web to prevent using the browser.

Camera/Camcorder to disable the camera and camcorder function.

Force Location On to prevent turning the Location function off. See GPS Services.
4. Select On.