KPDL Operators
7-129
com10envelope
(4.125 x 9.5 envelope)
Set imageable area to Commercial 10
envelope size. See KPDL Printable Area on
page 140. This operator is in userdict.
monarcenvelope
(3.875 x 7.5 envelope)
Set imageable area to Monarch envelope size.
See KPDL Printable Area on page 140. This
operator is in userdict.
com6envelope Set imageable area to Commercial 6 envelope
size. See KPDL Printable Area on page 140.
This operator is in userdict.
com9envelope
(3.75 x 8.875 envelope)
Set imageable area to Commercial 9 envelope
size. See KPDL Printable Area on page 140.
This operator is in userdict.
a5 Set imageable area to A5 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
a6 Set imageable area to A6 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
b6 Set imageable area to B6 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
b5envelope Set imageable area to ISO B5 size. See KPDL
Printable Area on page 140. This operator is in
userdict.
c4envelope Set imageable area to c4 envelope size. See
KPDL Printable Area on page 140. This
operator is in userdict.
c5envelope Set imageable area to International C5
envelope size. See KPDL Printable Area on
page 140. This operator is in userdict.
custom Set imageable area to custom size. See KPDL
Printable Area on page 140. This operator is in
userdict.
postcard Set imageable area to postcard size. See KPDL
Printable Area on page 140. This operator is in
userdict.
doublepostcard Set imageable area to double postcard size. See
KPDL Printable Area on page 140. This
operator is in userdict.
bool setdefaultduplexmode Select whether or not to print in duplex mode
as default. (true: duplex, false: simplex)
defaultduplexmode bool Get default duplex mode setting (true: duplex,
false: simplex)
bool setduplexmode Set/cancel duplex mode. (true: duplex, false:
simplex)
duplexmode bool Get current setting of duplex mode. (true:
duplex, false: simplex)
bool setdefaulttumble Set duplex printing tumble mode for binding
on short side (true) or long side (false) of page.
defaulttumble bool Get the default tumble mode setting. (true:
short-edge bind, false: long-edge bind)
bool settumble Set tumble mode. (true: short-edge bind, false:
long-edge bind)
tumble bool Get current tumble mode setting. (true: short-
edge bind, false: long-edge bind)
firstside bool During duplex printing, returns whether the
current print side is the front or back. During
simplex printing, returns whether the current
page is even or odd. (true: front or odd page,
false: back
or even page)
int setdefaultpapertray Set the default paper tray as:
0: tray 1
1: tray 2
2: envelope feeder
3: MP tray (Cassette mode)
4: tray 3
5: tray 4
6: tray 5
7: tray 6
Table 7.46. KPDL Status Operators (Sheet 3 of 5)
Preceding stack Operator Result Description
To Next Page
Loading...
Need help?
General