Kyocera ECOSYS FS-C8525MFP Driver Guide

Imaging
9
Select the desired color profile and click Set as Default Profile.
10
Click Close.
Windows XP
1
Click Start, click Printers and Faxes.
2
Right-click the desired color printer.
3
Select Properties.
4
Select the Color Management tab and click Add.
5
In the Add Profile Association dialog box, select a color profile from the list
and click Add.
6
In the Color Management tab, select Manual.
7
Select the desired color profile from the list and click Set as Default.
8
Click Apply.
Color Adjustment
Color Adjustment lets you customize the two color spaces in the driver and
save up to three custom groups. Color space changes can be made to hue,
saturation, and lightness (HSL) or to color balance levels.
Note: If different custom settings are selected in Color Adjustment and
Color Optimizer (Advanced tab), the latest change takes precedence and is
applied to the print job.
In a client-server environment, settings a user makes in the client computer are
saved for future use.
Selecting Custom Color Adjustment
If a custom color setting has already been defined, you can select and apply it to
a print job.
1
In Imaging > Color mode, select Full color.
2
In the Adjustment list, select Custom 1, Custom 2, or Custom 3.
3
Click OK.
Adjusting HSL (Hue, Saturation, Lightness)
HSL controls adjust the full spectrum, brightness, contrast, and vividness of the
color.
7-9 User Guide

Kyocera ECOSYS FS-C8525MFP Specifications

General

Category	Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Standard Paper Capacity	500 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Memory	1 GB
Memory (Maximum)	2 GB
Connectivity	USB 2.0, Ethernet
Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Copy Speed	25 copies per minute
Fax Resolution	400 x 400 dpi
Max Paper Capacity	1, 600 sheets
Operating Systems Supported	Windows, Mac, Linux
Type	Multifunction