Kyocera ECOSYS M2035dn

3
3-11
Basic Operation
The procedure for using zoom copying is explained below.
1 Press the Function Menu key. Function Menu appears.
2 Press the  or  key to select [Zoom].
3 Press the OK key. Zoom appears.
4 Press the  or  key to select the desired
magnification.
To copy in the same size as the original, select [100%].
To select automatic zoom, select [Auto].
To use fixed magnifications, select [Standard Zoom] and
press the
OK key. Standard Zoom appears. Press the 
or
 key to select the desired magnification. If you select
[Other] and press the
OK key, you can select from
additional magnifications.
To enter a magnification, select [Zoom Entry] and press
the
OK key. Zoom Entry appears. Use the numeric keys
to enter the any magnification.
5 Press the OK key. Completed . is displayed and the
screen returns to the basic screen.
6 Press the Start key. Copying begins.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection T
Zoom: a b
*********************
2 Auto
3 Standard Zoom
1 *100%
Standard Zoom: a b
4 129% STMT >> LTR
*********************
6 78% LGL >> LTR
5 *100%
Zoom Entry: D b
(25 - 400)
*****100 %