Preparation before Use
2-30
NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the
FAX Operation Guide.
Accessing Command Center RX
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Command Center RX as well as their current
status.
NOTE: If the screen “There is a problem with this website's security certificate.” is displayed, configure the
certificate. For details on Certificates, refer to the Command Center RX User Guide.
You can also continue the operation without configuring the certificate.
3
Select a category from the navigation bar on the left of the screen. When you log in to the machine as an
administrator, you will see [Device Settings], [Function Settings], [Network Settings], [Security Settings], and
[Management Settings].
To Next Page
Loading...
