3
3-19
Basic Operation
Send as E-mail
Sends a scanned original image as an E-mail attachment.
NOTE:
• You must have a network environment in which this machine can connect to a mail server. It is recommended
that the machine be used in an environment in which it can connect to the mail server at any time over a LAN.
• Access the Command Center RX beforehand and specify the settings required for sending e-mail. For details,
refer to the
Command Center RX on page 2-29
.
• Refer to
Command Center RX on 2-29
for details on entering characters.
1
Press the
Send
key.
Displays the screen for sending.
2
Place the originals on the platen or in the document
processor.
NOTE:
For loading instructions, refer to
Loading
Originals on page 2-59
.
3
Press the
or
key to select [E-mail].
4
Press the
OK
key. Address Entry appears.
5
Enter the destination e-mail address.
NOTE:
Destination can be specified using the Address
Book or the One-touch keys. Refer to
Specifying
Destination on page 3-25
.
To Next Page
Loading...
