Kyocera ECOSYS M2035dn

8-34
Default Setting (System Menu)
3 Press the  or  key to select [Timer Setting], and press
the
OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
4 The Timer Settings menu appears.
5 Press the  or  key to select [Err. Clear Timer].
6 Press the OK key. Err. Clear Timer appears.
7 Press the  or  key to set the Error Clear Timer. Set
the amount of time before clearing errors in seconds.
You cannot use the numeric keys to enter this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset
Err. Clear Timer: D b
(5 - 495)
******30* sec.