Kyocera ECOSYS M2035dn

8
8-81
Default Setting (System Menu)
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/zoom) is
performed.
The table below shows the available settings. The default setting is
Off .
Use the procedure below to specify the automatic zoom priority.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the  or  key to select [Auto % Priority].
4 Press the OK key. Auto % Priority appears.
5 Press the  or  key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
Item Detail
Off No zoom performed (copied in original size).
On Automatic zoom performed as appropriate.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Copy: a b
*********************
2 AutoPaperSelect.
3 Auto % Priority
[ Exit ]
1 Paper Selection
Auto % Priority: a b
*********************
2 On
1 *Off