8-134
Default Setting (System Menu)
Editing One-touch Key
Edit/delete the destinations you added to One-touch Key.
Use the procedure below to edit the one-touch key.
1
In the Send or FAX screen, press the one-touch key
where you want to edit the destination and hold it (2
seconds or longer). Select Key Set. appears.
The screen shown is the one when No.1/No.12 is
pressed and held.
2
Press the
or
key to select the key number where
you want to edit the destination.
3
Press the
OK
key. The Key Edit appears.
4
Press the
or
key to select [Edit].
NOTE:
If you select [Delete] here and press the
OK
key,
you can delete the registration of the destination. If you
press [Yes] (the
Left Select
key) in the screen that appears,
Completed.
is displayed and the registration of the
destination is deleted.
5
Press the
OK
key. The Address Book list screen
appears.
6
Press the
or
key to select the destination you want
to newly register.
NOTE:
If you want to search from the Address Book, refer
to
Search in Address Book on page 3-26
.
7
Press the
OK
key. A confirmation screen appears.
8
Press [Yes] (the
Left Select
key). The selected
destination is registered to the one-touch key,
overwriting the previous one.
Registered.
is displayed
and the screen returns to the basic screen.