Kyocera ECOSYS M2035dn

8
8-145
Default Setting (System Menu)
8 Press the OK key. TCP/IP appears.
9 Press the  or  key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10 Press the  or  key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting appears.
12 Press the  or  key to select [Auto-IP].
13 Press the OK key. Auto-IP appears.
14 Press the  or  key to select [Off] and then press the
OK key.
Completed. is displayed and the screen returns to the
IPv4 Setting menu.
TCP/IP: a b
*********************
2 *On
1 Off
TCP/IP Settings: a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting
IPv4 Setting: a b
1 DHCP
*********************
3 IP Address
[ Exit ]
2 Auto-IP
Auto-IP: a b
1 Off
*********************
2 *On