Kyocera ECOSYS M2035dn

2
Preparation before Use
2-45
NOTE: In Windows XP or Windows Vista, follow the procedure below to set the port.
1 In Windows XP, from
Start button on the Windows, select Control Panel , and then Windows Firewall .
In Windows Vista, from
Start button on the Windows, select Control Panel , Security , and then Turn Windows
Firewall on or off
.
If the User Account Control dialog box appears, click the
Continue button.
2 Click the Exceptions tab and then the
Add port... button.
3 Specify
Add a Port settings.
Enter any name in "Name" (example: Scan to SMB). This will be the name of the new port. Enter "445" in "Port
Number". Select
TCP for "Protocol".
4 Click the
OK button to close the Folder Options screen.
In Windows 8, follow the procedure below to set the port.
1 In charms on Desktop, click
Settings , Control Panel , System and Security , and then Windows Firewall .
If the User Account Control dialog box appears, click the
Continue button.
2 Configure the settings, refer to Configuring Windows Firewall (for Windows 7) on page 2-42 .