Why my Kyocera All in One Printer cannot receive document?
If your Kyocera All in One Printer cannot receive a document, ensure the modular cord is correctly connected. If a communication error is displayed, resolve the error and ask the sender to retry. Also, check if RX (reception) restriction is activated and, if so, cancel it.
Why my Kyocera ECOSYS M2530dn All in One Printer cannot send document?
If your Kyocera All in One Printer cannot send a document, ensure the modular cord is correctly connected. If a communication error is displayed, resolve the error and try sending again. Also, check if TX (transmission) restriction is activated and, if so, cancel it.
How to fix 'Add paper in cassette' error on Kyocera ECOSYS M2530dn All in One Printer?
If your Kyocera All in One Printer displays 'Add paper in cassette 1 (~3). or Add paper in MP tray.' message, it means the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If the type of printing paper is specified, the necessary paper types are also displayed. To use another paper source, select the paper source and press the OK key. Alternatively, press [Paper] (the Right Select key), select the desired paper source, and then press the OK key. It could also mean that the cassette for the specified paper type is not available. Press [Paper] (the Right Select key), select another paper source, and then press the OK key. It may also mean that the cassette is not securely loaded. Remove the cassette and reload it completely.
What to do if Kyocera ECOSYS M2530dn All in One Printer cannot feed paper set cassette 1?
If your Kyocera All in One Printer cannot feed paper set cassette 1, check if any of the paper feeders or the printer cassette upper than the selected one properly closed when one or more optional feeders are installed and close the paper feeder properly.
What to do if Kyocera ECOSYS M2530dn All in One Printer cannot feed originals?
If your Kyocera All in One Printer cannot feed originals, when placing originals in the document processor, align the original width guides securely before placing the originals.
How to fix Kyocera ECOSYS M2530dn All in One Printer dirty printouts?
If the printouts from your Kyocera All in One Printer are dirty, the platen or the document processor might be dirty. Clean the platen or the document processor.
What to do if Kyocera All in One Printer printouts are wrinkled?
If the printouts from your Kyocera All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if Kyocera ECOSYS M2530dn All in One Printer doesn't respond?
If the operation panel of your Kyocera All in One Printer does not respond when the power switch is turned on, plug the power cord into an AC outlet.
What to do if Kyocera ECOSYS M2530dn ejects blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, check the following: * When placing originals on the platen, ensure they are face-down and aligned with the slit glass. * When placing originals in the document processor, ensure they are face-up.
What to do if Kyocera ECOSYS M2530dn All in One Printer cannot print?
If your Kyocera All in One Printer is not printing, check the following: * Ensure the machine is plugged into an AC outlet. * Verify the machine is powered on. * Make sure the printer cable is securely connected. * If the machine was powered on before connecting the printer cable, power it on again after connecting the cable. * If the print job is paused, press [Resume] to resume printing. * If an error message is displayed, follow the corresponding procedure.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1800 x 600 DPI |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 7 s |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 6.9 s |
| Scan to | E-mail, FTP, SMB, USB |
| Scan drivers | TWAIN, WIA |
| Scanner type | ADF scanner |
| Grayscale levels | 256 |
| Maximum scan area | Legal (216 x 356) mm |
| Scan speed (black) | 35 ppm |
| Scan speed (color) | 14 ppm |
| Image formats supported | JPG, TIF |
| Document formats supported | PDF, XPS |
| Faxing | Mono faxing |
| Fax memory | 256 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Fax speed dialing (max numbers) | 200 |
| Digital sender | - |
| Printing colors | Black |
| Maximum duty cycle | 20000 pages per month |
| Number of print cartridges | 1 |
| Page description languages | Epson LQ, IBM ProPrinter, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3 |
| Processor model | 465S |
| Processor family | PowerPC |
| Compatible memory cards | SD |
| Maximum internal memory | 1536 MB |
| Sound power level (standby) | 28.3 dB |
| Sound pressure level (copying) | 50.9 dB |
| Sound pressure level (quiet mode) | 49 dB |
| Paper input type | Cassette, Paper tray |
| Total input capacity | 350 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 4 |
| Multi-Purpose tray input capacity | 50 sheets |
| Custom media width | 70 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 148 - 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Media thickness (min) | 0.11 mm |
| Paper tray media types | Envelopes, Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Auto Document Feeder (ADF) media weight | 50 - 120 g/m² |
| Display | LCD |
| Product color | Black, White |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Wi-Fi | No |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 62 W |
| Power consumption (PowerSave) | 3.7 W |
| Power consumption (average operating) | 431 W |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Certification | TÜV/GS, CE |
| Sustainability certificates | Blue Angel, ENERGY STAR |
Weight and Dimensions| Depth | 430 mm |
|---|---|
| Width | 494 mm |
| Height | 448 mm |
Describes the machine's operation panel layout and functions.
Guides on selecting and preparing necessary cables for connection.
Explains network interface compatibility and configuration settings.
Instructions for installing printer drivers and utility software on a PC.
Details the procedure for performing basic copying operations.
Explains how to print documents from computer applications.
Covers the process of sending scanned images via e-mail or to a PC.
Configures network settings like LAN interface and TCP/IP.
Instructions for cleaning the machine's glass platen and document processor.
Step-by-step guide for replacing the toner container.
Provides guidelines for identifying and correcting common machine problems.
Explains how to interpret and resolve error messages displayed on the control panel.
Offers procedures to remove jammed paper from various locations.
To Next Page
