What to do if Kyocera ECOSYS M2530dn printouts are too light?
- KKelly WolfeAug 25, 2025
If your Kyocera All in One Printer's printouts are too light, consider the following: * If the machine is in Manual Density mode, select the correct density level. * Ensure the toner is distributed evenly within the toner container by shaking it from side to side several times. * If there's a message indicating the need for more toner, replace the toner container. * If the paper is damp, replace it with new paper. * If EcoPrint mode is enabled, disable it. * Also, verify that the paper type setting is correct for the paper being used.