2PK/2PL/2PM/2PN-5
1-3-33
U260 Selecting the timing for copy counting
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user request.
Setting
1. Press the start key.
2. Select the copy count timing using the cursor up/down keys.
* : Initial setting: EJECT
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U265 Setting OEM purchaser code
Description
Sets the OEM purchaser code.
Purpose
Sets the code when replacing the main PWB and the like.
Setting
1. Press the start key.
2. Change the setting value using the numeric keys.
3. Press the start key. The setting is set.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U285 Setting service status page
Description
Determines displaying the digital dot coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF using the cursor up/down keys.
* : Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
FEED When secondary paper feed starts
EJECT When the paper is ejected
Display Description
ON Displays the digital dot coverage
OFF Not to display the digital dot coverage