2PK/2PL/2PM/2PN-3
1-3-45
U600 Initializing all data
Description
Initializes software switches and all data in the backup data on the FAX control PWB, according
to the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes
the file system, communication past record and register setting contents.
Purpose
To initialize the FAX control PWB.
Method
1. Press the start key.
The screen for entering the destination code and OEM code is displayed.
2. Select [Country Code] and enter a destination code using the numeric keys (refer to the des-
tination code list on following for the destination code).
OEM code is no operation necessary.
3. Select [Execute] and press the start key. Data initialization starts. To cancel data initialization,
press the stop key.
4. After data initialization, the entered destination, OEM codes and ROM version are displayed.
A ROM version displays three kinds, application, boot, and IPL.
Destination code list
Item No. Description
Code Destination Code Destination
000 Japan 250 Russia
007 Argentina 253 CTR21 (European nations)
009 Australia Italy
022 Brazil Germany
038 China Spain
080 Hong Kong U.K.
084 Indonesia Netherlands
088 Israel Sweden
097 Korea France
108 Malaysia Austria
115 Mexico Switzerland
126 New Zealand Belgium
136 Peru Denmark
137 Philippines Finland
152 Saudi Arabiat Portugal
156 Singapore Ireland
159 South Africa Norway
169 Thailand 254 Taiwan
181 U.S.A.