2PK/2PL/2PM/2PN
1-3-51
U612 Setting system 3
Description
Makes settings for fax transmission regarding operation and automatic printing of the protocol
list.
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Selecting if auto reduction in the auxiliary direction is to be performed
Sets whether to receive a long document by automatically reducing it in the auxiliary direction or
at 100% magnification.
1. Select the setting using the cursor left/right keys.
* : Initial setting: ON
2. Press the start key. The setting is set.
Setting the automatic printing of the protocol list
Sets if the protocol list is automatically printed out.
1. Select the setting using the cursor left/right keys.
* : Initial setting: OFF
2. Press the start key. The setting is set.
Item No. Description
Display Description
AUTO REDUCTION Selects if auto reduction in the auxiliary direction is to be per-
formed.
PROTOCOL LIST Sets the automatic printing of the protocol list.
DETECT TRAIL Sets the detection of trailing edge margin.
Display Description
ON Auto reduction is performed if the received document is longer
than the fax paper.
OFF Auto reduction is not performed.
Display Description
ON The protocol list is automatically printed out after communica-
tion.
OFF The protocol list is not printed out automatically.
ERR The protocol list is automatically printed out after communica-
tion only if a communication error occurs.