2PX/2PY-2
1-1-2
Scanning system Flat bed scanning by CCD image sensor
Photoconductor OPC drum (diameter 30 mm)
Image write system Semiconductor laser
Charging system Charger roller
Developing system
Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container
Transfer system
Primary: Transfer belt
Secondary: Transfer roller
Separation system Small diameter separation
Cleaning system Drum: Counter blade
Charge erasing system Exposure by cleaning lamp (LED)
Fusing system
Heat and pressure fusing with the heat roller and the press roller
Heat source: halogen heater
Abnormally high temperature protection devices: thermostat
CPU
PowerPC465S (667MHz)
Main
memory
Standard
1024MB
Maximum
2048MB
Interface
Standard
USB interface connector: 1 (USB Hi-speed)
USB host: 2
Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)
Option
eKUIO slot: 1
Resolution 600 × 600 dpi
Operating
environment
Temperature 10 to 32.5 °C/50 to 90.5 °F
Humidity 15 to 80% RH
Altitude 2,500 m/8,202 ft or less
Brightness 1,500 lux or less
Dimensions (W × D × H)
514 × 550 × 603 mm
20 1/4 × 21 5/8 × 23 3/4”
Weight
38.6 kg / 85.1 lb
(with toner container)
38.7 kg / 85.3 lb
(with toner container)
Space required (W × D)
514 × 750 mm (using MP tray)
20 1/4 × 29 1/2” (using MP tray)
Rated input
120 V AC, 60 Hz, more than 9.0 A
220 - 240 V AC, 50/60 Hz, more than 4.8 A
Options
Paper feeder × 2, Expanded memory, Card authentication kit, Card reader
holder, Network interface kit, USB keyboard, SSD
Item
Specifications
3 in 1 model (without FAX) 4 in 1 model (with FAX)
To Next Page
Loading...
