2PX/2PY-1
1-5-64
36. Disconnect the connectors (YC15,
YC37, YC40,YC38, YC39, YC42) from
the main PWB.
37. Loosen four screws fixing the machine
rear side of the main PWB.
*: Be sure to retighten the screws after reat-
taching the wire holder.
Figure 1-5-102
38. Remove the wires from the wire holder.
39. Remove two screws.
40. Release three hooks and then remove
the wire holder.
Figure 1-5-103
YC15
YC37
YC40
YC38
YC39
YC42
Screws
Main PWB
Wire holder
Hook
Hook
Hook
Screw
Screw
To Next Page
Loading...
