2-19
Installing and Setting up the Machine > Network Setup
Wired Connection by Using LAN Cable
1
Connect the machine with a computer
1 Connect the machine with a computer via LAN cable when the machine is powered on.
2 T
urn on the computer.
IP address (link local address) of the machine an
d computer is generated automatically.
2
Insert the DVD.
3
Display the screen.
4
Select [Maintenance].
5
[Wi-Fi Setup Tool] > [OK]
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run se
tup.exe].
• If the user account management window appears, click [Ye
s] ([Allow]).
1Click [View License Agreement]
and read the License Agreement.
2Click [Accept].
1
2
To Next Page
Loading...
