2-20
Installing and Setting up the Machine > Network Setup
6
Configure the settings.
1 [Do not use automatic configuration] > [Next] > [Next]
2 [Use LAN
cable] > [Next] > [Next]
3 [Eas
y setup] > [Next]
The machine is detected.
4 Select the mac
hine > [Next]
5 Select
[Use the device settings.] on [Authentication mode], and enter the login user
name and password. Login user name and Password are both Admin.
6 Con
figure the communication settings > [Next]
7 Cha
nge the settings of access point as necessary > [Next]
The network is configured.
Wireless LAN Connection by Using Wi-Fi Direct
1
Display the screen.
[Menu] key > [▲] [] key > [Network] > [OK] key > [▲] [] key > [Wi-Fi Direct Set] >
[OK]
key > [▲] [] key > [Wi-Fi Direct] > [OK] key
2
Configure the settings.
[▲] [] key > [On] > [OK] key
3
Restart the network.
[Menu] key > [▲] [] key > [Network] > [OK] key > [▲] [] key > [Restart Network] >
[OK]
key > [Yes]
4
Connect a computer or a handheld device with the machine.
5
Insert the DVD.
• Only one machine can be searched using Wi-Fi Setup Tool. It may take times to search
the machine.
• If the machine is not detected, select [Advanced setup] > [Next]. Select [Express] or
[Custom] as device discovery method and specify the IP address or host name to
search the machine.
Setting Wi-Fi Direct (page 2-22)