D
Diana MurphyAug 28, 2025
How to resolve 'Add toner' message on Kyocera Printer?
- TTyler ScottAug 28, 2025
If your Kyocera printer displays the 'Add toner' message, replace the toner container.
To Next PageTo Next PageHow to resolve 'Add toner' message on Kyocera Printer?
If your Kyocera printer displays the 'Add toner' message, replace the toner container.
How to resolve 'Load paper in cassette 1' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in cassette 1' message, it means the indicated cassette is out of paper. Simply load paper into the cassette.
How to fix vertical streaks on Kyocera Printer prints?
If you are seeing vertical streaks on your Kyocera printer prints, the inside of the machine may be dirty. Check the toner container and replace it if necessary. Also, clean the charger wire. Ensure that the main charger cleaner of the drum unit is in its original position.
What to do if my Kyocera Printer printouts are too dark?
If your Kyocera printer's printouts are too dark, it could be due to the density settings. If the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, select the correct density level.
How to fix dirty printouts from Kyocera Printer?
If your Kyocera printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Also, the charger wire could be dirty, so ensure you clean that as well.
What to do if my Kyocera Printer printouts are too light?
If your Kyocera printer's printouts are too light, several factors could be the cause. If the machine is in Auto Density mode, set the correct density level. If it's in Manual Density mode, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there's a message indicating the need for toner, replace the toner container. Damp paper can also cause light prints, so replace the paper with new paper. Finally, check if EcoPrint mode is enabled and, if so, disable it.
What to do if my Kyocera Printer is not printing?
If your Kyocera printer is not printing, first, ensure the power cord is plugged into an AC outlet and that the main power switch is turned on. Check that the printer cable is securely connected. If the printer cable was connected before powering on the machine, power cycle the printer. Finally, verify that the print job is not paused; if it is, press the Resume key to resume printing.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Grayscale levels | 256 |
| Maximum copy resolution | 600 x 600 DPI |
| Time to first copy (black, normal) | 6.9 s |
| Internal memory | 256 MB |
| Dimensions (WxDxH) | 494 x 410 x 366 mm |
| Power requirements | 220 - 240 |
| All-in-one functions | Copy, Scan |
| Maximum internal memory | 0.768 GB |
| Compatible operating systems | Windows 2000/XP/Server2003/Vista/7/Server2008 |
| Duty cycle letter size (maximum) | 2800 pages per month |
| Standard interfaces | USB 2.0 |
| Power consumption (standby) | 88 W |
| Power consumption (average operating) | 494 W |
| Non-ISO print media sizes | Folio |
| Maximum duty cycle | 20000 pages per month |
| Market positioning | Business |