EasyManuals Logo

Kyocera FS-1350DN Advanced Operation Guide

Kyocera FS-1350DN
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
Using the Operation Panel 2-29
Duplex (Duplex printing)
Using the duplexer, you can automatically print on both sides of the
paper. The duplexer is mounted underneath the printer.
Duplex printing is available for the following paper types:
PLAIN
PREPRINTED
BOND
RECYCLED
ROUGH
COLOR
PREPUNCHED
HIGH QUALITY
CUSTOM 1 (to 8)
Activating the duplexer is done by selecting either short edge or long
edge binding mode.
Binding Modes
Binding refers to the manner in which printed pages of paper are joined
together (by gluing, stitching, etc.) in book form. The two possible types
of binding are: long-edge binding, in which pages are joined together
along their long edge; and short-edge binding, in which they are joined
together along their short edge. In selecting a binding type, you must
also consider the orientation of the printed page. You can use long-edge
or short-edge binding with either landscape or portrait printing.
Depending on the binding type and print orientation, the duplexer
provides four types of binding. These are: (1) portrait, long-edge, (2)
portrait, short edge, (3) landscape, long-edge, and (4) landscape, short-
edge. The figure below shows these binding methods.
1 Press Z while Print Settings > is displayed.
2 Press U or V repeatedly until >Duplex appears.
3 Press [OK]. A blinking question mark (?) appears.
Note Duplex printing can be also performed from the MP tray. If
the paper to be fed from the MP tray does not match the paper size
and paper type of the current paper feed source cassette, a paper
jam may occur.
(1)
(3)
(2)
(4)
Portrait,
long-edge
Landscape,
long-edge
Portrait,
short-edge
Landscape,
short-edge
>Duplex
? Off

Table of Contents

Other manuals for Kyocera FS-1350DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-1350DN and is the answer not in the manual?

Kyocera FS-1350DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Processor modelPowerPC–440F5
Maximum internal memory1152 MB
Sound power level (standby)30 dB
Sound pressure level (printing)54 dB
Power supply typeAC 220 - 240 V, 50/60 Hz
Capacity cartridge7200 sheets
Standard media sizes(105 x 148 - 216 x 297 mm)
Power consumption (active)484 W
Compliance industry standardsTUV/GS, CE
Number of print cartridges1
Total input capacity250 sheets
Maximum input capacity800 sheets
Maximum print size216 x 356 mm
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Power consumption (standby)12 W
Power consumption (PowerSave)7.1 W
DisplayLCD
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)375 x 393 x 267 mm

Related product manuals