EasyManuals Logo

Kyocera FS-1350DN Advanced Operation Guide

Kyocera FS-1350DN
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
2-54 Using the Operation Panel
For setting the time until the panel is reset, refer to the next section
Panel Reset Timer (Setting the panel reset timer).
1 Press Z while >Timer > is displayed.
2 Press U or V repeatedly until >>Auto Panel Reset appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select On or Off using U or V.
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
Panel Reset Timer (Setting the panel reset timer)
When Auto Panel Reset is set to On, this sets the time until the panel is
automatically reset after the user stops using the panel. The default time
is 90 seconds.
1 Press Z while >Timer > is displayed.
2 Press U or V repeatedly until >>Panel Reset Timer appears.
3 Press [OK]. The message display shows a blinking cursor (_).
4 Press U or V to increase or decrease the value at the blinking
cursor and set the desired time. The time must be set between 005
and 495 seconds, in 5-second increments. Use Y and Z to move
the cursor right and left.
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
Auto Sleep (Setting the sleep timer)
The printer has a sleep timer that is used to conserve power when the
printer is not printing, processing, or receiving data. The default setting is
On.
1 Press Z while >Timer > is displayed.
2 Press U or V repeatedly until >>Auto Sleep appears.
3 To turn off the sleep timer, press [OK]. A blinking question mark (?)
appears.
4 Select On or Off using U or V.
5 Press [OK]. The sleep timer is turned off.
6 Press [MENU]. The display returns to Ready.
>>Auto Panel
Reset ? On
>>Panel Reset
Timer 090
sec.
>>Auto Sleep
? On

Table of Contents

Other manuals for Kyocera FS-1350DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-1350DN and is the answer not in the manual?

Kyocera FS-1350DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Processor modelPowerPC–440F5
Maximum internal memory1152 MB
Sound power level (standby)30 dB
Sound pressure level (printing)54 dB
Power supply typeAC 220 - 240 V, 50/60 Hz
Capacity cartridge7200 sheets
Standard media sizes(105 x 148 - 216 x 297 mm)
Power consumption (active)484 W
Compliance industry standardsTUV/GS, CE
Number of print cartridges1
Total input capacity250 sheets
Maximum input capacity800 sheets
Maximum print size216 x 356 mm
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Power consumption (standby)12 W
Power consumption (PowerSave)7.1 W
DisplayLCD
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)375 x 393 x 267 mm

Related product manuals