Kyocera FS-C1020MFP

5
D On the “Printer Settings” page, you can assign a name to the printing sys-
tem. This is the name that appears in Windows “Printers and Faxes” and in
the printer list in applications.
If this machine is connected locally, “Printer Settings” does not appear for a
first time installation. Proceed to
E
.
You can also choose to share this machine with others or set this machine as
the default printer. Make your selections, and then click [Next].
E On the “Confirm Settings” page, click [Install] if the settings are correct.
Click [Back] to correct the settings.
F The “Installation Completed” page appears. Click [Finish] to exit the instal-
lation wizard and return to the CD-ROM menu.
If you are installing a printer driver, a test page is printed. If you do not want
to print a test page, clear the “Print a test page” check box.
G The installation is now complete. If prompted, restart your computer.
Note
❒ In this procedure, PCL 6 was the only PCL driver installed. If you need to
install the PCL 5 printer driver, install it separately, and be sure to config-
ure it using the same settings as the PCL 6 printer driver that is already in-
stalled.
Custom Mode
This section explains how to do a custom installation using Custom Mode,
which lets you specify which drivers and software to install for USB and net-
work connections.
Important
❒ The procedure in this section is an example based on Windows XP. The actual
procedure might vary depending on the operating system you are using.
Use this procedure to install the drivers using Custom Mode.
A Ensure that this machine and your computer are turned on and connected
using a USB or network cable.
If the “Found New Hardware Wizard” dialog box appears, click [Cancel].
B On the “Installation Method” page, select [Custom Mode].
C The “Discover Printing System” page appears displaying [Discover] select-
ed. Using this option, you can let the system find all the devices available
for driver installation.
You can also use the “Custom select” option, which allows you to choose the
printing system and print port to install to. If you want to use this option, pro-
ceed to
E
.