IC Link for Windows
{PAGE }
Tools Menu
EMCR Creator (continued)
5. After all the pages have been defined in the EMCR Creator, click on the [Add to project…] button. This
will create two files called ccpy on.prn and ccpy off.prn which can be saved onto the local PC and added
into the IC Link Project File under the “Host-File forms” tab of IC Link.
6. The two files which will be created are the EMCR Enable (emcr on.prn) and the EMCR Disable (emcr
off.prn). One copy of each of these files can be saved onto the PC as shown in the figures below, and will
also be added to the IC Link Project file under the Host-File forms tab as *.prn files.
To Next Page
Loading...
Need help?
General