IC Link for Windows
{PAGE }
Project Menu
Project Settings
The Project Settings define the IC Card Image type and Capacities. The Project Settings can be accessed as
follows:
1. From the IC Link menu bar select [Project>Settings…]. This will display the Project Settings dialogue box
where the Image and Card Capacity settings are defined as follows:
Image Settings
• SRAM IC Card
• JEIDA (PCMCIA) IC Card
• OTP IC Card
• EPROM
• Hard Disk
• Compact Flash IC Card
• Micro Drive
Card Capacity
• 32 KB ~ 128 MB
• Custom Settings
2. Once you have defined the Project Settings Image and Card Capacity, click on the OK button to submit
the settings with the Project File.
To Next Page
Loading...
Need help?
General