Troubleshooting
5-6 BASIC OPERATION GUIDE
Clean the main charger units.
Open the left cover. Slowly pull the green wire cleaner knob to
each of the main charger units in and out a few times. For full
details, see
Cleaning the Main Charger Unit on page 4-8.
Clean the parts in the paper paths—such as the paper cassette,
etc.
Check the transfer roller.
If the transfer roller is dirty with toner, try printing several pages.
Printing incomplete or out of
position
Check that the application software is correctly operated.
See Tips on page 5-2.
Skewed-color printout Conduct color registration using the printer operator panel. For full
details, see the Using the Operator Panel section in the Advanced
Operation Guide.
Printed Results Corrective Action
To Next Page
Loading...
