Troubleshooting 4-11
Memory Card and USB Memory Errors
RAM Disk Errors
Code Meaning
01 The printer does not support the memory card inserted, or the memory card
is broken. Insert the correct memory card.
For more information, refer to Memory Card (Using the memory card) section
of the Advanced Operation Guide.
02 The memory card is not installed. Recheck the requirements for using the
system and the memory card.
03 The memory card is write protected. Check the memory card's status.
04 There is not enough space in the memory card. Delete unnecessary files or
use a new memory card.
05 The specified file is not on the memory card or the USB memory.
06 There is not enough printer memory to support the memory card system.
Increase printer memory.
50 The memory card is write protected, or invalid. Check the memory card's
status.
Code Meaning
01 Format error. Try turning the power off and on again.
02 RAM disk mode is Off. Turn RAM disk mode On from the operation panel.
04 No disk space. Purge unnecessary files.
05 Specified file is not on disk.
06 Insufficient printer memory to support the RAM disk system. Expand printer
memory.
To Next Page
Loading...
Need help?
General