E
EcoPrint Imaging feature that changes toner saturation, making the entire image,
text and graphics, appear lighter in the printed job. The following values in the EcoPrint
list represent toner saved from none to the maximum amount: Off, Least, Less,
Medium, More, and Most – toner saved. The amount of toner is also determined by the
driver settings and the type of data printed (text, graphics, or both). EcoPrint does not
increase print speed. This feature is also available in the Quick Print and Basic tabs. If
EcoPrint is turned on in the Quick Print or Basic tab, the Imaging tab displays the
previously selected level.
Edit Quick Print This feature lets you customize the Quick Print view with your
preferred print job options.
e-MPS Job storage (e-MPS) is a set of options for saving print jobs in printing
system memory, so that you can print or reprint them later. Print jobs can easily be
reprinted later from the printing system’s operation panel, and printing of sensitive
documents can be restricted to approved users.
Enable client profile Client profile refers to profile settings saved on a server and
accessed by clients in a client/server environment. This feature in the Advanced tab
lets an administrator control and distribute profiles.
F
Fast printing Printing mode that decreases spool size and increases print speed.
Finishing edge Finishing edge aligns the matching sides of two different page
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
Full bleed Layout feature that lets you produce full-page printing without any
margins by printing to a larger sized-paper than the original, and then letting you trim
the edges.
G
GDI compatible mode A page description language option that accurately
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
Grayscale Range of gray tones varying from black at the darkest to white at the
lightest.
Gutter Blank space on the left side or top of a printed page that can be increased
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
I
Ignore Application Collation Check box in Device Settings > Compatibility that
determines the priority of Collate settings. If the check box is selected, the printer
driver setting is used. If the check box is cleared, the software application setting is
used.
J
Job accounting An accounting system that records and controls the number of
pages printed by each account ID. Account IDs can be assigned at the printing system
ii
User Guide
To Next Page
Loading...
Need help?
General